$7.50
The Felco 30/91 replacement springs are made for the Felco 30 pruner. Two springs come shrink-wrapped in one package. Felco spare parts are manufactured to the highest and most rigorous quality standards.
1 in stock (can be backordered)
The Felco 30/91 replacement springs are made for the Felco 30 pruner. Two springs come shrink-wrapped in one package. One of the great advantages of Felco pruning and cutting tools is that in many models, parts affected by wear can be replaced. Just like the finished tools, Felco spare parts are manufactured to the highest and most rigorous quality standards.
This Felco F-621-3 Replacement Blade is for the Felco 621 Pruning Saw. The blade length is 9.5 (24 cm). It is a pull stroke action saw that puts certainty in your hands. PLEASE NOTE: This replacement blade will fit the handle for the Felco F-620 but then the saw will not fit in the sheath.
The Felco F-600 Folding Pruning Saw measures 14 inches. It is a high-performance pull-stroke pruning saw which produces a clean, precise cut. The steel blade is heat treated and covered with hard chromium-plating for an extra tough, rust resistant blade. Resins will not cling to the blade and green wood will not clog the teeth.
This multi-purpose Felco pruning shear has an angled cutting head and longer handle and works with 25% less effort. Although it is normally held for use as a single-handed pruning shear, the extended length of the left handle also allows for two-handed use when cutting thick branches. The length is 10-1/2″ (270 mm) and it weights 10.9 oz.
The Felco replacement cutting blade is made for the F7 pruner and F8 pruner. Picture illustration instructions of how to replace this blade are shown on the back of the cutting blade packaging. Felco spare parts are manufactured to the highest and most rigorous quality standards.
The Felco 2-91 Replacement Spring Pak. Two springs come shrink-wrapped in one package. They are for F2, F4, F7, F8, F9, F10, F11, F19, F100, and F400 pruners.
This is the Felco 9-4 Replacement Contour Blade with screws for the F7 pruner and F8 pruner. A picture illustration on the packaging shows how to replace this part. Heimerdinger carries most of the replacement parts for the Felco pruners.
The Felco replacement cutting blade is made for the F2 pruner, the F4 pruner, the F-11 pruner, and F-400 pruner. Picture illustration instructions of how to replace this blade are shown on the back of the cutting blade packaging. Felco spare parts are manufactured to the highest and most rigorous quality standards.
The Felco 6/91 replacement springs for the Felco 6 and the Felco 12 pruner consist of two springs that come shrink-wrapped in one package as shown in the photo. One of the great advantages of Felco pruning and cutting tools is that in many models, parts affected by wear can be replaced. Just like the finished tools, Felco spare parts are manufactured to the highest and most rigorous quality standards.
Felco F-2-90 Nut/Bolt Set for F-2 Pruner in shrink wrap. They come shrink-wrapped as a set. Each piece cannot and is not sold separately. Felco spare parts are manufactured to the highest quality standards.
The Felco 7/90 nut and bolt set is made for the F7, F8, F9, F10 and F13 pruners. These parts are individually identified as 7-7, 2-16, 7-8, and 2-9, but we do not sell them individually. They come shrink-wrapped as a set. Felco spare parts are manufactured to the highest and most rigorous quality standards.
This is the 6-4 Replacement Contour Blade with screw for the F6 pruner and F12 pruner. A picture illustration on the packaging shows how to replace this part. Heimerdinger carries most of the replacement parts for the Felco pruners.
Reviews
There are no reviews yet.