RHL012 Sheep Skinner Carbon 5-1/4 IN for Knife Making
The RHL012 Sheep Skinner Carbon Blade is a Russell Green River Works classic design. This unique blade was used by pioneer sheep herders for skinning. It has a 5-1/4″ blade. It also measures 9-5/8″ overall length. It is made in the U.S.A.
Ripper Carbon Blade #RH2022 for Knife Making
This Ripper Carbon Blade #RH2022 for Knife Making is excellent for field dressing. It is also good for fish cleaning and kitchen slicing chores. The overall length is 8-3/4″. The blade measures 4″ and the width is 3/4″. The thickness 3/32″ and it weighs 1-1/2 ounces. Heimerdinger gets this from Jantz.
SS426 Puma Skinner Blade 4-1/8 IN for Knife Making
This SS426 Puma Skinner Blade is made from 6A stainless steel with a mirror finish. It has top thumb notches which make it easy to hold for use. The hidden tang blade is threaded with 4x.7mm threads. The overall length is 8-3/4″. The blade edge is 4-1/8″ x 1″ wide and 1/8″ thick.
SS427 Solingen Gutting Carbon Blade
This SS427 Solingen Gutting Carbon Blade has a 3-1/2″ cutting edge. This was designed by hunters for hunters. The blade is cut from .85 Solingen carbon steel, hardened to 55-57 Rockwell. It is also hand-finished. It measures 7-1/2″ in overall length.
SS427 Wapiti Hunter Blade with Gut Hook SS Polished Finish for Knife Making
The SS427 Wapiti Hunter Blade with Gut Hook has a mirror-polished blade. It also has a 1/4 inch gutting hook on the back of the blade. The cutting edge measures 3 1/4 and is 5/32 inch thick, with an overall measurement of 8 3/4. Knife is made from 6-A stainless.
SS441 Choctaw Drop Point Blade for Knife Making
The SS441 Choctaw Drop Point Blade has a satin finish. Additionally, the manufacturer makes this with 440-C stainless steel. The blade measures 8-1/2″ overall. The blade length is 3-1/2″ x 1-1/8″ and 9/64″ thick. It is for do-it-yourself knife making.
SS442 Cherokee Clip Point Skinner Blade for Knife Making
The SS442 Cherokee Clip Point Skinner knife blade has a satin finish. It is made with 440-C stainless steel. The blade measures 8-1/2″ overall. The blade length is 3-1/2″ x 1-1/8″ and 9/64″ thick. It is for do-it-yourself knife making.
SS443 Chickasaw Skinner Blade for Knife Making
The SS443 Chickasaw Skinner Blade has a satin finish. Additionally, the manufacturer makes this with 440-C stainless steel. The blade measures 8-1/2″ overall. The blade length is 3-1/2″ x 1-1/8″ and 9/64″ thick. It is for do-it-yourself knife making.
SS444 Razor Edge Boot Blade for Knife Making
This SS444 Razor Edge Boot Blade is a beautifully designed knife. It is hollow ground. The steel is 440-C stainless with a satin finish.. The overall length is 7-3/8″. the length of the blade 3-5/16″. it is designed for the hunter, fisherman, outdoorsman, and survivalist.
SS458 Sioux Hunter Blade 3 IN for Knife Making Blade
This SS458 Sioux Hunter Blade has a polished mirror finish. Furthermore, the blade is hollow ground. The overall length is 7-5/8″. The blade length is 3″. And the blade thickness is 5/32″. And finally, the handle holes are 1/4 ” with a 1/4″ thong hole. Designed for the hunter, fisherman, outdoorsman, and survivalist.
SS461 Apache Hunter Blade 3.5 IN for Knife Making
This JZ-SS461 Apache Hunter Blade is a highly polished hunting knife blade which measures 8-1/4″ overall with a 3-1/2″ x 1-3/32″ blade, which is 5/32″ thick. Made of 440C cutlery steel and polished to a bright mirror finish.
SS464 Kiowa Hunter Knife Making Blade Stainless Steel with Satin Finish
The SS464 Kiowa Hunter knife blade has a satin finish. Finger notches and thumb groove make this blade easy to hold and use. It is for do-it-yourself knife making. It is a 440-C stainless steel blade. This knife measures 6-3/4″ overall. The blade length is 2-3/4″. It is 3/4″ wide.
SS466 Comanche Skinner Blade 4.5 IN for Knife Making
This SS466 Comanche Skinner is a very small satin finished blade. It is a stainless steel. The overall length is 4-1/2 Inch. The blade length is 1.75 Inch and the blade width is 7/8 Inch.
SS470 Canadian Skinner Blade SS 3-1/4 IN for Knife Making
The SS470 Canadian Skinner Blade has a 1-3/4″ crush-ground serration on the top edge. The blade is 3/16″ thick. It is 440-C stainless steel and beautifully finished. It also has a hollow ground razor edge. It measures 7-1/2″ overall, The blade length 3-1/4″. It is made in the U.S.A.
SS495 Cheyene Hunter Blade for Knife Making
This SS495 Cheyene Hunter Blade is a very smartly designed stainless steel dagger blade. The overall length is 9-1/8″. The blade length is 4-1/2″ and the blade width is 1″, and the blade is 5/36″ thick. The built in thong holes is 1/4″. The tang holes are 1/4″ for use with mosaic pins or Corby rivets.
SS606 Bread Slicer Blade 9 IN for Knife Making
The SS606 Bread Slicer Blade is a long bread slicer blade. It is stainless steel. The blade measures 9 inches and has a scalloped cutting edge. The overall length is 15.5 inches.
SS640 Idaho Hunter Blade for Knife Making
This stylish traditional SS640 Idaho Hunter Blade has sharp, clean lines. Furthermore, the manufacturer uses high carbon stainless steel for this blade. Additionally, they polish the blade to a mirror finish. The integral guard makes this blade easy to complete with a handle or to create bolsters if desired.
SS826 Steak Knife Blade Polished for Knife Making
This S826 Steak Knife Blade is a traditional style. Jantz uses highly polished stainless steel to make this blade. Additionally, the blade measures 5″ x 11/16″ and is 1/16″ thick. The knife is 9″ in over-all length. It is for do-it-yourself knife making.
SS880 Sidewinder Stainless 3 In Blade for Knife Making
This is the SS880 Sidewinder Stainless 3 In Blade for do-it-yourself knife making. The round tang is threaded with a 1/4 inch end. Heimerdinger gets this blade from Jantz.
SS899 Tear Drop Dagger Blade for Knife Making
This SS899 Tear Drop Dagger Blade is a very smartly designed stainless steel dagger blade. It has a neat non-glare bead blast finish. The overall length is 10″. The blade length is 4″ and the blade width is 1-1/8″, and the blade is 1/8″ thick. The built in guard is 2″ wide. The tang holes are 7/32″ for use with mosaic pins or Corby rivets.