621-3 Replacement Blade for 621 Pruning Saw by Felco
This 621-3 Replacement Blade is for the Felco 621 Pruning Saw. The blade length is 9.5 (24 cm). It is a pull stroke action saw that puts certainty in your hands. PLEASE NOTE: This replacement blade will fit the handle for the Felco F-620 but then the saw will not fit in the sheath.
7-3 Replacement Cutting Blade for F-7 and F-8 Pruners by Felco
This is the 7-3 Replacement Cutting Blade for the F7 pruner and F8 pruners. A picture illustration on the packaging shows how to replace this part. Heimerdinger carries most of the replacement parts for the Felco pruners.
7-4 Replacement Counter Blade for F-7 and F-8 Pruners by Felco
This is the Felco 9-4 Replacement Contour Blade with screws for the F7 pruner and F8 pruner. A picture illustration on the packaging shows how to replace this part. Heimerdinger carries most of the replacement parts for the Felco pruners.
7-90 Nut and Bolt Set for the F7, F8, F9, F10 and F13 Pruners by
The Felco 7-90 Nut and Bolt Set. The set comes shrink-wrapped in one package. They are for F7, F8, F9, F10, F11 and F13. pruners. Heimerdinger carries most Felco replacement parts.
9-3 Replacement Cutting Blade for the F9 Pruner and F10 Pruner by
This is the Felco 9-3 Replacement Cutting Blade for the F9 pruner and F10 pruner. A picture illustration on the packaging shows how to replace this part. Heimerdinger carries most of the replacement parts for the Felco pruners.
9-4 Replacement Counter Blade for F-9 and F-10 Pruners by Felco
This is the 9-4 Replacement Counter Blade with screws for the Felco F9 pruner and F10 pruner. A picture illustration on the packaging shows how to replace this part. Heimerdinger carries most of the replacement parts for the Felco pruners.
A Salt Weapon by The General’s Hot Sauce
A Salt Weapon comes from The General’s Hot Sauce. It is one of the many hot sauce products that Heimerdinger Cutlery carries. Stop by and check out what we have in store.
AB101 Brass Rod 1/16 Inches x 12 Inches for Knife Making
The AB101 Brass Rod 1/16 for Knife Making is a s solid brass rod. It measures 1/16″ x 12″. It is for pinning handles or scales on blade tangs. Available in 12 inch lengths only. Heimerdinger purchases this from Jantz. It is for do-it-yourself knife making.
AB106 Brass Rod 3/16″ x 12″ for Knife Making
The AB106 Brass Rod is a s solid brass rod. It measures 3/16″ x 12″. It is for pinning handles or scales on blade tangs. Available in 12-inch lengths only. Heimerdinger purchases this from Jantz. It is for do-it-yourself knife making.
AB108 Brass Rod 1/8 Inches x 12 Inches for Knife Making
The AB108 Brass Rod is a s solid brass rod. It measures 1/16″ x 12″. It is for pinning handles or scales on blade tangs. Available in 12-inch lengths only. Heimerdinger purchases this from Jantz. It is for do-it-yourself knife making.
AB109 Brass Rod .157 IN x 12 IN for Knife Making
The AB109 Brass Rod is a s solid brass rod. It measures 5/32″ x 12″. It is for pinning handles or scales on blade tangs. Available in 12-inch lengths only. Heimerdinger purchases this from Jantz. It is for do-it-yourself knife making.
AB112 Brass Rod 3/16″ x 12″ for Knife Making
The AB112 Brass Rod is a s solid brass rod. It measures 3/16″ x 12″ It is for pinning handles or scales on blade tangs. Available in 12-inch lengths only. Heimerdinger purchases this from Jantz. It is for do-it-yourself knife making.
AB113 Brass Rod 7/32 Inches x 12 Inches for Knife Making
The AB113 Brass Rod is a s solid brass rod. It measures 7/32″ x 12″. It is for pinning handles or scales on blade tangs. Available in 12-inch lengths only. Heimerdinger purchases this from Jantz. It is for do-it-yourself knife making.
Acorn Nut Screw CBP416 Brass .25 IN
Acorn Nut Screw CBP416 has a 1/4″ diameter head. This three-piece rivet gives an extra finished appearance. The threaded rod measures 3/4″ long, and each nut measures 3/8″ long. When screwed together, the whole rivet measures approximately between an inch and 1-1/8″.
Acorn Nut Screw CPB316 Brass 3/16 IN
Acorn Nut Screw CPB316 has a 3/16″ diameter head. This three-piece rivet gives an extra finished appearance. The threaded rod measures 3/4″ long, and each nut measures 3/8″ long. When screwed together, the whole rivet measures approximately between an inch and 1-1/8″.
AN101 Nickel Silver Rod for Knife Making 1/16 IN x 12 IN
The AN101 Nickel Silver Rod is a s solid nickel rod. It measures 1/16-inch x 12-inch. It is for pinning handles or scales on blade tangs. Available in 12-inch lengths only. Heimerdinger purchases this from Jantz. It is for do-it-yourself knife making.
AN106 Nickel Silver Rod 3/32″ x 12″ for Knife Making
The AN106 Nickel Silver Rod for Knife Making is a s solid nickel rod. It measures 3/32″ x 12″. It is for pinning handles or scales on blade tangs. Available in 12-inch lengths only. Heimerdinger purchases this from Jantz. It is for do-it-yourself knife making.
AN108 Nickel Silver Rod 1/8″ x 12″ for Knife Making
The AN108 Nickel Silver Rod 1/8″ x 12″ for Knife Making is a s solid nickel rod. It measures 1/16″ x 12″. It is for pinning handles or scales on blade tangs. Available in 12 inch lengths only. Heimerdinger purchases this from Jantz. It is for do-it-yourself knife making.
AN112 Nickel Silver Rod for Knife Making 3/16 IN x 12 IN
The AN112 Nickel Silver Rod is a s solid nickel rod. It measures 1/16-inch x 12-inch. It is for pinning handles or scales on blade tangs. Available in 12-inch lengths only. Heimerdinger purchases this from Jantz. It is for do-it-yourself knife making.
Andis 01556 Clipper Blade for Master ML 1690
the Andis 01556 Clipper Blade is for the Master ML 1690. It fits the Andis Master #1690 hair clipper. This blade leaves the hair 1/100 inch. Heimerdinger also sells Andis replacement parts.