$35
This Cumberland Clip Point Skinner Blade has a satin finished, 440-C stainless steel blade. This beautifully finished blade is ground to a razor edge. It measures 8-1/2″ overall, and the blade measures 3-1/2″ x 1-1/8″ and is 9/64″ thick.
For build-it-yourself knife making, and designed with the hunter, fisherman, outdoorsman, and survivalist in mind. Identical to the Koval K-B blade, which is no longer available.
Available on backorder
This Cumberland Clip Point Skinner Blade has a satin finished, 440-C stainless steel blade. This beautifully finished blade is ground to a razor edge. It measures 8-1/2″ overall, and the blade measures 3-1/2″ x 1-1/8″ and is 9/64″ thick.
For build-it-yourself knife making, and designed with the hunter, fisherman, outdoorsman, and survivalist in mind. Identical to the Koval K-B blade, which is no longer available.
This JZ-KT101 Leather Fillet Knife Sheath has an inside opening of 1-3/8″ x 9-1/2″. This allows part of the handle goes inside the sheath. It designed for a fillet knife with a blade of approximately 7″. This sheath is not sealed or finished,.
The Norton India Combination Bench Stone IB8 8″ #85565 measures 8″x2″x1″. It is an aluminum oxide abrasive, with both a medium 240 grit on one side, and also a fine 400 grit on the other side. This 8″ stone is by far our biggest seller. Heimerdinger carries many Norton Products.
This Norton 87760 Sharpening Stone Oil XB1 comes in a 4-1/2 oz. tin can. It is a highly refined light mineral oil. It aids in faster, easier sharpening. This mineral oil contains no animal or fish oil. It also meets the U.S. Pharmacopoeia standards for mineral purity.
The SS464 Kiowa Hunter knife blade has a satin finish. Finger notches and thumb groove make this blade easy to hold and use. It is for do-it-yourself knife making. It is a 440-C stainless steel blade. This knife measures 6-3/4″ overall. The blade length is 2-3/4″. It is 3/4″ wide.
This SS427 Solingen Gutting Carbon Blade has a 3-1/2″ cutting edge. This was designed by hunters for hunters. The blade is cut from .85 Solingen carbon steel, hardened to 55-57 Rockwell. It is also hand-finished. It measures 7-1/2″ in overall length.
The SSKA Derwent Skinner Blade has a satin finish blade. It is made of 440-C surgical stainless steel. The blade measures 3 1/2″. The overall measurement is 8 1/2 In. The blade is notched for 3/8″ guard. Additionally, it has 6 extra holes around the edge to use 1/8″ Mosaic pins.
The RH2332 Paring Carbon Blade is a Russell Green River Works classic design. It produces a great looking knife still used for beef skinning. It does a great job on deer, elk or moose. The knife is made in the U.S.A.
The SS470 Canadian Skinner Blade has a 1-3/4″ crush-ground serration on the top edge. The blade is 3/16″ thick. It is 440-C stainless steel and beautifully finished. It also has a hollow ground razor edge. It measures 7-1/2″ overall, The blade length 3-1/4″. It is made in the U.S.A.
The SS443 Chickasaw Skinner Blade has a satin finish. Additionally, the manufacturer makes this with 440-C stainless steel. The blade measures 8-1/2″ overall. The blade length is 3-1/2″ x 1-1/8″ and 9/64″ thick. It is for do-it-yourself knife making.
This is the SS880 Sidewinder Stainless 3 In Blade for do-it-yourself knife making. The round tang is threaded with a 1/4 inch end. Heimerdinger gets this blade from Jantz.
This Ripper Carbon Blade #RH2022 for Knife Making is excellent for field dressing. It is also good for fish cleaning and kitchen slicing chores. The overall length is 8-3/4″. The blade measures 4″ and the width is 3/4″. The thickness 3/32″ and it weighs 1-1/2 ounces. Heimerdinger gets this from Jantz.
Reviews
There are no reviews yet.